Deals
A19TR
Mehrzweckgreifer A19H-TR-60 mit geschlossener Rückwand für Bagger von 14t - 19t ohne Drehmotor für den Gebrauch mit Tiltrotatoren Inhalt: 300 Liter Max. Öffnungsweite: 1880 mm Baubreite: 600 mm Betriebsdruck: 320 bar Schließkraft bei 320 bar: 27 kN Traglast: 4000 kg Eigengewicht: 570 kg mit Rückschlagventil Farbe: RAL 7043 verkehrsgrau *** ### M E S S E G E R Ä T ### ***
In stock
C02H30
Our C02H-30 robust clamshell bucket in a compact design with a width of 300 mm is ideal for your mini excavator with an operating weight of 1t to 2t. Thanks to the use of cutting edge material with a Brinell hardness of 500HB, the tool has a long service life. Wear is kept low thanks to a generously dimensioned bearing. Due to the compact design, the tool can be loaded to the maximum and the high closing force guarantees very good digging properties. The digging grab is cardanically attached to the carrier device and is already equipped with a corresponding quick-change adapter KSW01 for the L-Lock system, as well as a pendulum brake. The built-on rotator with 360° endless rotation makes the tool extremely mobile and it has a hose protection attached. An integrated non-return valve guarantees that the load is held securely, even if the pressure drops.
In stock
Container disch. unit KM920-1A
Container Entleergerät KM 920-1A Ringe Ringmaße nach Zg. M 920-20 4500 kg Traglast 260-350 bar Modell ab Bj. 2018 Ang.Zg. M 920-70
In stock
DC05L 140 KSW03 SYM
The DCL ditch cleaning bucket is the perfect tool for removing, loading and backfilling sand, gravel and soil. Ditch clearing, leveling and straightening of routes, shoulders and lawns as well as the creation of ditch, trough and slope embankments are other applications for which the DCL ditch cleaning bucket is ideally suited. The integrated quick-change adapter is compatible with the L-Lock system.
In stock
DC05L-100 Grab.rä
The DCL ditch cleaning bucket is the perfect tool for removing, loading and backfilling sand, gravel and soil. Ditch clearing, leveling and straightening of routes, shoulders and lawns as well as the creation of ditch, trough and slope embankments are other applications for which the DCL ditch cleaning bucket is ideally suited. The integrated quick-change adapter is compatible with the L-Lock system.
In stock
DC08L-160 Grab.rä
The DCL ditch cleaning bucket is the perfect tool for removing, loading and backfilling sand, gravel and soil. Ditch clearing, leveling and straightening of routes, shoulders and lawns as well as the creation of ditch, trough and slope embankments are other applications for which the DCL ditch cleaning bucket is ideally suited. The integrated quick-change adapter is compatible with the L-Lock system.
In stock
GB02L-030 KSW01
Our robust GBL general bucket was designed for digging and excavation work in light to medium-heavy soils, as well as for loading or backfilling sand, gravel and earth. The elongated bottom of the bucket makes it easier to penetrate the soil and ensures a high digging capacity. The protruding bottom offers better leveling properties and serves as protection against wear. The integrated quick-change adapter is compatible with the L-Lock system.
In stock
GB02L-050 Tieflöf
Our robust GBL general bucket was designed for digging and excavation work in light to medium-heavy soils, as well as for loading or backfilling sand, gravel and earth. The elongated bottom of the bucket makes it easier to penetrate the soil and ensures a high digging capacity. The protruding bottom offers better leveling properties and serves as protection against wear. The integrated quick-change adapter is compatible with the L-Lock system.
In stock
GB04L-060 Tieflöf
Our robust GBL general bucket was designed for digging and excavation work in light to medium-heavy soils, as well as for loading or backfilling sand, gravel and earth. The elongated bottom of the bucket makes it easier to penetrate the soil and ensures a high digging capacity. The protruding bottom offers better leveling properties and serves as protection against wear. The integrated quick-change adapter is compatible with the L-Lock system.
In stock
GB06L-040 Tieflöf
Our robust GBL general bucket was designed for digging and excavation work in light to medium-heavy soils, as well as for loading or backfilling sand, gravel and earth. The elongated bottom of the bucket makes it easier to penetrate the soil and ensures a high digging capacity. The protruding bottom offers better leveling properties and serves as protection against wear. The integrated quick-change adapter is compatible with the L-Lock system.
In stock
GB06L-080 Tieflöf
Our robust GBL general bucket was designed for digging and excavation work in light to medium-heavy soils, as well as for loading or backfilling sand, gravel and earth. The elongated bottom of the bucket makes it easier to penetrate the soil and ensures a high digging capacity. The protruding bottom offers better leveling properties and serves as protection against wear. The integrated quick-change adapter is compatible with the L-Lock system.
In stock
GB08L-080 SYM
Our robust GBL general bucket was designed for digging and excavation work in light to medium-heavy soils, as well as for loading or backfilling sand, gravel and earth. The elongated bottom of the bucket makes it easier to penetrate the soil and ensures a high digging capacity. The protruding bottom offers better leveling properties and serves as protection against wear. The integrated quick-change adapter is compatible with the L-Lock system.
In stock
KM 652V-5-300
"The small orange peel grapple KM 652-5 small for the handling of bulky scrap is available with five tines and three di¤erent volumes (120l, 180l, 240l). ▷The KM 652-5 small is available with 5 half closing tines for handling swarf, scrap, rubbish, waste paper etc. ▷Long life due to a solid design: the hydraulic cylinder pistons are protected by the gripping arms and the hydraulic hoses, connections and oil distributor are positioned in the robust centre section. Special wear resistant materials used in the production of the gripping arms and oversized bearings ensure a long service life for these sturdy grapples. ▷A lifting-eye on the centre section acts as an additional stop. ▷ Powerful operation with high closing force (11 kN to 13 kN at an operating pressure of 26 MPa)."
In stock
KM 652V-5-300
"The small orange peel grapple KM 652-5 small for the handling of bulky scrap is available with five tines and three di¤erent volumes (120l, 180l, 240l). ▷The KM 652-5 small is available with 5 half closing tines for handling swarf, scrap, rubbish, waste paper etc. ▷Long life due to a solid design: the hydraulic cylinder pistons are protected by the gripping arms and the hydraulic hoses, connections and oil distributor are positioned in the robust centre section. Special wear resistant materials used in the production of the gripping arms and oversized bearings ensure a long service life for these sturdy grapples. ▷A lifting-eye on the centre section acts as an additional stop. ▷ Powerful operation with high closing force (11 kN to 13 kN at an operating pressure of 26 MPa)."
In stock
KM 920-31
The KINSHOFER container discharge unit with twin-hook for deposit containers with system Schäfer are characterised by short cycle times and an attractive acquisition price. Containers can be emptied even faster and more cost e¤ectively with a one-man operation. The attachment is extremely maintenance low, robust and low-built thanks to its compact construction. Container discharge unit KM 920-31 for containers with twin-hook system ▷ Robust mechanics. ▷ Precise positioning with KINSHOFER rotator, short hose connection. ▷ Independence of crane operating pressure due to the pressure relief valve. ▷ Easy handling thanks to low overall height. ▷ Low maintenance.
In stock
SKD8 OQ45
General Bucket for all kinds of excavation works in light and medium-heavy soils as well as for loading or backfilling of sand, gravel and earth. The integrated quick change adapter is adjusted to the system L-Lock and can be mounted both directions. Can be used as backhoe bucket or face shovel (
In stock
SKK 22-380l OQ65
The SKK cable buckets are used for digging out cable ducts and are very robust with a low weight thanks to the use of HB 400 steel. These properties make the bucket an eff icient and profitable tool. Depending on the type, the bucket is suitable for excavators with an operating weight of up to 12t / 26,400 lbs.
In stock
SKP10 S45
The SKP grading buckets are ideal for all types of grading and leveling work and are very robust with a low weight thanks to the use of HB 400 steel. These properties make the bucket an eff icient and profitable tool. Depending on the type, the bucket is suitable for excavators with an operating weight of up to 12t / 26,400lbs. ▷ Robust: low wear. ▷ Easy mounting to the carrier. ▷ Diff erent adapters available. ▷ No protruding parts.
In stock
SKP16 OQ65
The SKP grading buckets are ideal for all types of grading and leveling work and are very robust with a low weight thanks to the use of HB 400 steel. These properties make the bucket an eff icient and profitable tool. Depending on the type, the bucket is suitable for excavators with an operating weight of up to 12t / 26,400lbs. ▷ Robust: low wear. ▷ Easy mounting to the carrier. ▷ Diff erent adapters available. ▷ No protruding parts.
In stock
TB02L-120 Schwenkl
Our hydraulically operated TBL tilt bucket with horizontal cylinder is ideal for all common earthworks and road construction work. With a tilt angle of 90° (2 x 45°), it is ideal for leveling and straightening, as well as for creating ditches, troughs and embankments. The bucket comes standard with a rear cutting edge and a piston rod guard. The welded quick-change adapter is compatible with the L-Lock system.
In stock
TB03L-100 Schwenkl
Our hydraulically operated TBL tilt bucket with horizontal cylinder is ideal for all common earthworks and road construction work. With a tilt angle of 90° (2 x 45°), it is ideal for leveling and straightening, as well as for creating ditches, troughs and embankments. The bucket comes standard with a rear cutting edge and a piston rod guard. The welded quick-change adapter is compatible with the L-Lock system.
In stock
TB03L-120 Schwenkl
Our hydraulically operated TBL tilt bucket with horizontal cylinder is ideal for all common earthworks and road construction work. With a tilt angle of 90° (2 x 45°), it is ideal for leveling and straightening, as well as for creating ditches, troughs and embankments. The bucket comes standard with a rear cutting edge and a piston rod guard. The welded quick-change adapter is compatible with the L-Lock system.
In stock
TB05L-140 Schwenkl
Our hydraulically operated TBL tilt bucket with horizontal cylinder is ideal for all common earthworks and road construction work. With a tilt angle of 90° (2 x 45°), it is ideal for leveling and straightening, as well as for creating ditches, troughs and embankments. The bucket comes standard with a rear cutting edge and a piston rod guard. The welded quick-change adapter is compatible with the L-Lock system.
In stock
TB06L-140 Schwenkl
Our hydraulically operated TBL tilt bucket with horizontal cylinder is ideal for all common earthworks and road construction work. With a tilt angle of 90° (2 x 45°), it is ideal for leveling and straightening, as well as for creating ditches, troughs and embankments. The bucket comes standard with a rear cutting edge and a piston rod guard. The welded quick-change adapter is compatible with the L-Lock system.
In stock