Deals
KM 920-31
The KINSHOFER container discharge unit with twin-hook for deposit containers with system Schäfer are characterised by short cycle times and an attractive acquisition price. Containers can be emptied even faster and more cost e¤ectively with a one-man operation. The attachment is extremely maintenance low, robust and low-built thanks to its compact construction. Container discharge unit KM 920-31 for containers with twin-hook system ▷ Robust mechanics. ▷ Precise positioning with KINSHOFER rotator, short hose connection. ▷ Independence of crane operating pressure due to the pressure relief valve. ▷ Easy handling thanks to low overall height. ▷ Low maintenance.
In stock
P30VHD-600-4W
Mehrschalengreifer mit 4 oder 5 Greifarmen und für den Umschlag von sperrigen Gütern mit Bagger bis 30t Dienstgewicht im sehr harten Einsatz. ▷ In zwei Volumenversionen und diversen Schalenformen F, H, W, T erhältlich. ▷ Zylinder mit wechselbarem Kolbenstangenschutz und Endlagendämpfung. ▷ Ölverteiler und Hydraulikschläuche sind geschützt im Schalenträger verbaut. ▷ Verstärkte Greifarme, Schalen aus verschleissfestem Material HB 400. ▷ Angeschweisste Schalenspitzen aus geschmiedetem & vergütetem Material HB 500. ▷ Passgenaue Verdrehsicherungen, massiv geschweisste Endanschläge (Öff nen & Schliessen). ▷ Hohe Schliesskraft ▷ Verstärkte Bolzen mit grossen Auflageflächen, spezialbeschichtete Vollstahlbuchsen. ▷ Robustes, voll integriertes Vierpunkt-Drehwerk mit innenliegenden Schläuchen sichert optimale Kraftübertragung und verhindert Schlauchbruch. Druckbegrenzungsventil schützt vor Überlastung. ▷ Drehwerk-Drehkranz und Ritzel abgedichtet verbaut. Drehdurchführung und Motor direkt zugäng
In stock
SKD8 OQ45
General Bucket for all kinds of excavation works in light and medium-heavy soils as well as for loading or backfilling of sand, gravel and earth. The integrated quick change adapter is adjusted to the system L-Lock and can be mounted both directions. Can be used as backhoe bucket or face shovel (
In stock
SKK 22-380l OQ65
The SKK cable buckets are used for digging out cable ducts and are very robust with a low weight thanks to the use of HB 400 steel. These properties make the bucket an eff icient and profitable tool. Depending on the type, the bucket is suitable for excavators with an operating weight of up to 12t / 26,400 lbs.
In stock
SKP10 S45
The SKP grading buckets are ideal for all types of grading and leveling work and are very robust with a low weight thanks to the use of HB 400 steel. These properties make the bucket an eff icient and profitable tool. Depending on the type, the bucket is suitable for excavators with an operating weight of up to 12t / 26,400lbs. ▷ Robust: low wear. ▷ Easy mounting to the carrier. ▷ Diff erent adapters available. ▷ No protruding parts.
In stock
SKP16 OQ65
The SKP grading buckets are ideal for all types of grading and leveling work and are very robust with a low weight thanks to the use of HB 400 steel. These properties make the bucket an eff icient and profitable tool. Depending on the type, the bucket is suitable for excavators with an operating weight of up to 12t / 26,400lbs. ▷ Robust: low wear. ▷ Easy mounting to the carrier. ▷ Diff erent adapters available. ▷ No protruding parts.
In stock
TB02L-120 Schwenkl
Our hydraulically operated TBL tilt bucket with horizontal cylinder is ideal for all common earthworks and road construction work. With a tilt angle of 90° (2 x 45°), it is ideal for leveling and straightening, as well as for creating ditches, troughs and embankments. The bucket comes standard with a rear cutting edge and a piston rod guard. The welded quick-change adapter is compatible with the L-Lock system.
In stock
TB03L-100 Schwenkl
Our hydraulically operated TBL tilt bucket with horizontal cylinder is ideal for all common earthworks and road construction work. With a tilt angle of 90° (2 x 45°), it is ideal for leveling and straightening, as well as for creating ditches, troughs and embankments. The bucket comes standard with a rear cutting edge and a piston rod guard. The welded quick-change adapter is compatible with the L-Lock system.
In stock
TB03L-120 Schwenkl
Our hydraulically operated TBL tilt bucket with horizontal cylinder is ideal for all common earthworks and road construction work. With a tilt angle of 90° (2 x 45°), it is ideal for leveling and straightening, as well as for creating ditches, troughs and embankments. The bucket comes standard with a rear cutting edge and a piston rod guard. The welded quick-change adapter is compatible with the L-Lock system.
In stock
TB05L-140 Schwenkl
Our hydraulically operated TBL tilt bucket with horizontal cylinder is ideal for all common earthworks and road construction work. With a tilt angle of 90° (2 x 45°), it is ideal for leveling and straightening, as well as for creating ditches, troughs and embankments. The bucket comes standard with a rear cutting edge and a piston rod guard. The welded quick-change adapter is compatible with the L-Lock system.
In stock
TB06L-140 Schwenkl
Our hydraulically operated TBL tilt bucket with horizontal cylinder is ideal for all common earthworks and road construction work. With a tilt angle of 90° (2 x 45°), it is ideal for leveling and straightening, as well as for creating ditches, troughs and embankments. The bucket comes standard with a rear cutting edge and a piston rod guard. The welded quick-change adapter is compatible with the L-Lock system.
In stock
TB06L-150 Schwenkl
Our hydraulically operated TBL tilt bucket with horizontal cylinder is ideal for all common earthworks and road construction work. With a tilt angle of 90° (2 x 45°), it is ideal for leveling and straightening, as well as for creating ditches, troughs and embankments. The bucket comes standard with a rear cutting edge and a piston rod guard. The welded quick-change adapter is compatible with the L-Lock system.
In stock
TB06L-160 Schwenkl
Our hydraulically operated TBL tilt bucket with horizontal cylinder is ideal for all common earthworks and road construction work. With a tilt angle of 90° (2 x 45°), it is ideal for leveling and straightening, as well as for creating ditches, troughs and embankments. The bucket comes standard with a rear cutting edge and a piston rod guard. The welded quick-change adapter is compatible with the L-Lock system.
In stock
TB08L-180 Schwenkl
Our hydraulically operated TBL tilt bucket with horizontal cylinder is ideal for all common earthworks and road construction work. With a tilt angle of 90° (2 x 45°), it is ideal for leveling and straightening, as well as for creating ditches, troughs and embankments. The bucket comes standard with a rear cutting edge and a piston rod guard. The welded quick-change adapter is compatible with the L-Lock system.
In stock
TC07-180 KHS08
The Kinshofer TC tilt coupler allows a tilt angle of up to 180°, which increases the flexibility and efficiency of all your attachments enormously. The low-maintenance tilt coupler is extremely compact and robust, with no cylinders or protruding parts. The low overall height ensures a high breakaway force. The Kinshofer quick-change systems fully comply with all applicable national and international standards and regulations, including Machinery Directive 2006/42/EG, DIN EN 474-1, ISO13031 and SUVA. The L-Lock system was designed to be fully compatible with the Lehnhoff adaptations.
In stock
TC07-180 KHS08
The Kinshofer TC tilt coupler allows a tilt angle of up to 180°, which increases the flexibility and efficiency of all your attachments enormously. The low-maintenance tilt coupler is extremely compact and robust, with no cylinders or protruding parts. The low overall height ensures a high breakaway force. The Kinshofer quick-change systems fully comply with all applicable national and international standards and regulations, including Machinery Directive 2006/42/EG, DIN EN 474-1, ISO13031 and SUVA. The L-Lock system was designed to be fully compatible with the Lehnhoff adaptations.
In stock
TC07-180 KHS08
The Kinshofer TC tilt coupler allows a tilt angle of up to 180°, which increases the flexibility and efficiency of all your attachments enormously. The low-maintenance tilt coupler is extremely compact and robust, with no cylinders or protruding parts. The low overall height ensures a high breakaway force. The Kinshofer quick-change systems fully comply with all applicable national and international standards and regulations, including Machinery Directive 2006/42/EG, DIN EN 474-1, ISO13031 and SUVA. The L-Lock system was designed to be fully compatible with the Lehnhoff adaptations.
In stock
TC07-180 KHS08
The Kinshofer TC tilt coupler allows a tilt angle of up to 180°, which increases the flexibility and efficiency of all your attachments enormously. The low-maintenance tilt coupler is extremely compact and robust, with no cylinders or protruding parts. The low overall height ensures a high breakaway force. The Kinshofer quick-change systems fully comply with all applicable national and international standards and regulations, including Machinery Directive 2006/42/EG, DIN EN 474-1, ISO13031 and SUVA. The L-Lock system was designed to be fully compatible with the Lehnhoff adaptations.
In stock
TC10-180 KHS08
The Kinshofer TC tilt coupler allows a tilt angle of up to 180°, which increases the flexibility and efficiency of all your attachments enormously. The low-maintenance tilt coupler is extremely compact and robust, with no cylinders or protruding parts. The low overall height ensures a high breakaway force. The Kinshofer quick-change systems fully comply with all applicable national and international standards and regulations, including Machinery Directive 2006/42/EG, DIN EN 474-1, ISO13031 and SUVA. The L-Lock system was designed to be fully compatible with the Lehnhoff adaptations.
In stock
TC10-KHS08-Yanmar B9
The Kinshofer TC tilt coupler allows a tilt angle of up to 180°, which increases the flexibility and efficiency of all your attachments enormously. The low-maintenance tilt coupler is extremely compact and robust, with no cylinders or protruding parts. The low overall height ensures a high breakaway force. The Kinshofer quick-change systems fully comply with all applicable national and international standards and regulations, including Machinery Directive 2006/42/EG, DIN EN 474-1, ISO13031 and SUVA. The L-Lock system was designed to be fully compatible with the Lehnhoff adaptations.
In stock
